Full View Aluminum Door

The Wayne Dalton Model K-AL Aluminum Full-View Door is sturdy, virtually maintenance free and weather-resistant.  This commercial glass sectional door is ideal for a variety of applications ranging from car washes and tire stores to store fronts and other buildings where you want to increase visibility and allow more light to enter the interior.  Model K-AL is offered with a wide range of glass options and frame finishes, as well as optional insulated rails and stiles.

aluminum-door-model-KAL.jpg
Door Options

Glass Options:

Low E

Clear Wire

Bronze Tinted

Gray Tinted

Clear (1/8" Standard)

Special glass types that are not listed are available.  Solid aluminum, perforated aluminum or expanded mesh aluminum panels may be specified in lieu of glass.

Options & Accessories:

Lock options: Interior mounted slide lock with interlock switch for automatic operator, keyed lock, keyed lock with interlock switch for automatic operator.

Weather stripping: jamb and header seals.

*Static (Non-Impact) Wind Load designs are based on engineering analysis and although not certified by FBC, TDI, or Miami Dade, the designs are compliant with the 2015 IBC.

Operation Options:

Pull rope

Chain hoist

Electric operator

Spring Options:

10,000 cycles (standard)

25,000 cycles

50,000 cycles

100,000 cycles

Highest Quality Standards

Max Width: 24'

Max Height: 18'

Aluminum alloy frame

R-value* up to 4.25

2" section thickness

Straight edge frame

*Wayne Dalton uses a calculated door section R-value for our insulated doors.

Door Construction:

1. Large glass panels allow maximum light and visibility.

2. 2" thick section with box-type extrusions.

3. Vinyl weather seal between sections to minimize air and water infiltration.

4. 2-1/4" integral reinforcing fins on large doors.

5. Aluminum panels that match the rail color available.

6. bottom rail with integral reinforcing fin on doors over 16'2" wide.  Optional on narrower doors.

Optional Insulated Frame:

Insulated rails and stiles are available as an option.  Foamed-in-place polyurethane insulation fills the rails and stiles providing enhanced thermal efficiency that adds R-value* of up to 4.25 on the door.

Polyurethane insulation in the rails and stiles are an available option.  Polyurethane insulation fills the entire cavity and offers better R-value per inch than polystyrene insulation.

*Wayne Dalton uses a calculated door section R-value for our insulated doors.

Colors

Anodized Finishes:

Clear (Standard)

Dark Bronze

Black

Powder Coat Finishes:

White

Brown

Black

RAL Powder Coat:

Wayne Dalton also offers approximately 200 powder coat options to complement the exterior colors of a building.

Online color swatches are only digital reproductions of actual standards and will vary in appearance due to differences in monitor and video card output.  These digital representations should not be used to finalize color selection(s).  Please reach out to us to discuss actual color samples to match your preferences.

Documents
Contact Information

2 Lukens Dr.

New Castle, DE 19720

Suite 600

Call Us: 1-888-927-3835

Email: info@warehousetechnology.com

How Can We Help You?
  • LinkedIn Social Icon
  • Twitter Social Icon